Thursday, February 18, 2010

Toilet Bowl Not Filling Completely Toilet Flushing Problem?

Toilet Flushing problem? - toilet bowl not filling completely

My bathroom is fully clean. Symptoms: The tank is filled with water when the handle is empty. Emissions of water tank and seems to be filled. After completing the filling of the tank, flowing bowl slowly, but does not charge normally. I read other answers to similar problems and tried. (eg replacement of a ball / valve assembly, the chain handle is short, I ran a snake the toilet to remove any obstacle, I checked the outside line backup and ran the air is too dry pipe clogged.

Help! What can I do or re-examine? Can I block something or something else?

Thank you,

3 comments:

wicket35... said...

If you have hard water? How to use the bathroom cleaning tablets in your toilet tank? I like to observe things. below the rim of the cup, a number of holes, is the tendency of sediment and minerals that come with a nail or something else that is small and pointed cleaned clogged. Also at the bottom of the toilet, most of the toilets is a drill hole, the water and draws water and dirt. This can clog and you will not go down the garbage out of the pan, swirl and just go quietly. Put this with a sharp object like that. also if you want to use purification tablets if they reach the small tend to wash into the hole in the trap and restrict the flow of water into the tank causes a slight color. alsoTry dumping a bucket directly into the container. correct when it lifted, you know what the problem is between the tank and bowl.

John V said...

You have a leak in the case of the rubber should be replaced by a new one.

baron said...

or need a pond - just in case.

Post a Comment